Every time we use the computer, after completion should make the process shut down. Well, usually we sometimes prefer males waiting for the shutdown process is quite long, so we pull directly from the AC outlet aja Well for those who never like that mending read this first
If we are too often shut down the computer by turning off the electrical connection to a computer
without the Shut Down process, there are several obstacles that will occur:
1. At the time of the computer shutdown process will re-register the computer components in use (used) and software and data used or delete. If we turn off the computer directly, then the component or software and data used can not be stored into the register, so that when problems occur on a computer then the computer can not be held recofery system based on the date or time on the set.
2. At the time of the shutdown process, the processor provides instructions to the bios to stop all pekerjaan2 equipment components, so that current or power is disconnected normally unused, but if we turn off immediately the sudden death of computer components without breaking the normal flow so that over time will cause damage to computer components.
3. At the time of the shutdown process computer fan will work twice faster processor to the cooling process, if we turn off the computer directly, then cooling the processor is not working normally then over time the processor can be damaged.
4. At the time of the shutdown system memory will be emptied, so that when the computer is used again, the memory is completely refreshed in the circumstances, if we turn off the computer directly then it is probable that memory can be corrupted.
5. At the time of the shutdown process works the hard drive to store the data ordered by the processor as well as copying data components and software into the computer registry, then haed hard drive will return early keposisi (keposisi not read the hard drive), if we turn off the computer directly then in addition to data and software components are not stored the registry, as well as head position at tengah2 cylinder hard disk, so that when the computer is turned back to damage the cylinder head, causing Band sectors hard disk, hard disk over time will cause damage.
That is why at the time of the shutdown process the old computer to die.
Therefore if you turn off the computer should have to do the shutdown process
if we do not want any problems of damage to our computer system, both software and hardware.
without the Shut Down process, there are several obstacles that will occur:
1. At the time of the computer shutdown process will re-register the computer components in use (used) and software and data used or delete. If we turn off the computer directly, then the component or software and data used can not be stored into the register, so that when problems occur on a computer then the computer can not be held recofery system based on the date or time on the set.
2. At the time of the shutdown process, the processor provides instructions to the bios to stop all pekerjaan2 equipment components, so that current or power is disconnected normally unused, but if we turn off immediately the sudden death of computer components without breaking the normal flow so that over time will cause damage to computer components.
3. At the time of the shutdown process computer fan will work twice faster processor to the cooling process, if we turn off the computer directly, then cooling the processor is not working normally then over time the processor can be damaged.
4. At the time of the shutdown system memory will be emptied, so that when the computer is used again, the memory is completely refreshed in the circumstances, if we turn off the computer directly then it is probable that memory can be corrupted.
5. At the time of the shutdown process works the hard drive to store the data ordered by the processor as well as copying data components and software into the computer registry, then haed hard drive will return early keposisi (keposisi not read the hard drive), if we turn off the computer directly then in addition to data and software components are not stored the registry, as well as head position at tengah2 cylinder hard disk, so that when the computer is turned back to damage the cylinder head, causing Band sectors hard disk, hard disk over time will cause damage.
That is why at the time of the shutdown process the old computer to die.
Therefore if you turn off the computer should have to do the shutdown process
if we do not want any problems of damage to our computer system, both software and hardware.
.jpg)